ابزارآلات جانبی و تجهیزات مرتبط با فلنج فیسر ماژولار با قابلیت پخ زنی اتوماتیک انتهای لوله و ولوهای بزرگ مدل SDB Beveler and EP 424 End Prep Tooling ساخت وش آمریکا

ابزارآلات جانبی و تجهیزات مرتبط با فلنج فیسر ماژولار با قابلیت پخ زنی اتوماتیک انتهای لوله و ولوهای بزرگ مدل SDB Beveler and EP 424 End Prep Tooling ساخت وش آمریکا

اطلاعات گارانتی :

یک سال گارانتی

ضمانت نامه :

پنج سال خدمات پس از فروش
Beveling Tools
Description Part Number Application Image
Form Tool Insert Holder Kit
Low Range Holder ID 56-708-01
High Range Facing Insert Holder ID 56-708-02
37.5º Bevel Insert Holder 56-709-03
56-710-01 For completing facing and beveling of pipe with a 37.5º angle, both standard and J-prep; requires cutting tool sold separately
Form Tool Insert Holder – Includes holder, two insert screws & wrench.
30º 56-709-02 For beveling pipe; requires cutting tool insert sold separately
37.5º 56-709-03
Form Tool Cutting Tool – Insert for facing & beveling, double sided.
HSS 56-711-01 Most materials up to 32 RC hardness
Carbide 56-712-01 Materials harder than 32 RC
Form Tool Cutting Tool – Radius 3/32 “J” bevel insert, double sided.
HSS 56-711-02 Most materials up to 32 RC hardness
Carbide 56-712-02 Materials harder than 32 RC

 

Counterbore Tooling
Description Part Number Application Image
4:1 Taper Counterbore Tool
Minimum pipe ID size: Low Range 56-705-01 Most pipes
Maximum counterbore depth
1 1/8” (28.5mm)
Minimum pipe ID size: Medium Range 56-705-02
Minimum pipe ID size: High Range 56-705-03
Standard 3/8” x 3/8” (9.5mm x 9.5mm)
High speed tool bit.
Use with 56-424-00 and 56-424-01
56-713-00 Most pipes
10º ID Deburring Tool
Minimum pipe ID size: Low Range 56-702-01 10º ID taper, most pipes
Used for ID chamfering.
Minimum pipe ID size: Medium Range
56-702-02
Used for ID chamfering.
Minimum pipe ID size: High Range
56-702-03
4:1 Counterbore Tool Kit Maximum depth 3 1/8” (79.4mm)
Minimum ID 6” (152mm)
Standard tooling (EP 424 only)
Most pipes
Consists of tool insert holder 56-210-00
and 3 insert retaining screws.
Requires insert 60-700-04 sold separately
56-715-00
Counterbore Tooling Insert
For use with 56-715-00 Tool Kit 60-700-04

 

Single Point Tooling
Description Part Number Application Image
Single Point Holder
Low range single point tool holder
Requires tooling insert 52-701-01 sold separately.
56-424-00 Most materials less
than 32 RC hardness
Single Point Holder
High range single point tool holder
Requires tooling insert 52-701-01 sold separately.
56-424-01
Single Point Insert
Standard 3/8” x 3/8” (9.5mm x 9.5mm)
HSS Tool Bit for single point facing, beveling
Use with 56-424-00 and 56-424-01
52-701-01 Single point beveling
most materials less
than 32 RC hardness

 

Single Point Flange Facing Tools
Description Part Number Application Image
Flange Facing Tool Holder Kit
Kit includes a Low Range 56-714-03 and
High Range 56-714-02 insert tool holder,
two tool inserts, two insert retaining screws
and two screw wrenches.
56-418-01 Complete flange facing
Flange Facing Insert
Tool insert for single point flange facing.
Three-tipped insert for use with
56-418-01 Holder Kit
56-710-00 Flange facing and
record grooving

 

  • Denjet
  • Equalizer
  • Globe
  • Hiforce
  • Idrojet
  • Knuth
  • Lavor
  • Promotech
  • Rad
  • Tractel
  • Whitelegg
  • Wicksteed